Sewer Standard Details
Sewer Standard Details – Full Set (4.04 MB PDF)
Section 1 – Manhole Structures
| Detail Name | Issue Date |
 S-1.01 - Precast Concrete Manhole |
12/30/2021 |
| S-1.02 - Manhole Frame and Cover |
05/31/2022 |
| S-1.03 - Manhole Frame and Cover Adjustment |
12/30/2021 |
| S-1.04 - Inside Drop Manhole |
12/30/2021 |
| S-1.05 - 48 in. Diameter Shallow Precast Manhole |
12/30/2021 |
| S-1.06 - Doghouse Manhole |
12/30/2021 |
| S-1.07 - Force Main Discharge Manhole |
12/30/2021 |
| S-1.08 - Low Pressure Force Main Discharge |
12/30/2021 |
| S-1.09 - Manhole Step |
12/30/2021 |
| S-1.10 - Manhole Flow Channel |
12/30/2021 |
| S-1.11 - Manhole Abandonment |
12/30/2021 |
| S-1.12 - Pipe Abandonment at Manhole |
12/30/2021 |
| S-1.13 - Hot-Mix Ramping at Manhole |
12/30/2021 |
Section 2 – Laterals and Cleanouts
| Detail Name | Issue Date |
| S-2.01 - Sewer Lateral Cleanout |
12/30/2021 |
| S-2.02 - 6 in. Sewer Cleanout Frame and Cover |
05/31/2022 |
| S-2.03 - 8 in. Sewer Cleanout Frame and Cover |
05/31/2022 |
| S-2.04 - Deep Sewer Lateral Cleanout |
12/30/2021 |
| S-2.05 - Sewer Lateral Connections |
10/05/2022 |
| S-2.06 - Sewer Lateral Riser |
10/05/2022 |
| S-2.07 - Sewer Terminal Cleanout |
12/30/2021 |
| S-2.08 - Dual Wye Sewer Cleanout |
12/30/2021 |
| S-2.09 - Tee Inspection Port for Future Sewer Extensions |
12/30/2021 |
| S-2.10 - Sewer Lateral Capping |
12/30/2021 |
| S-2.11 - Sewer Lateral Cleanout Relocation |
12/30/2021 |
Section 3 – Pipe Trenching
| Detail Name | Issue Date |
| S-3.01 - Sewer Trench |
12/30/2021 |
| S-3.02 - Sewer Encasement |
12/30/2021 |
| S-3.03 - Casing Sleeve Installation |
12/30/2021 |
| S-3.04 - Pipe Crossing Protection |
06/13/2022 |
Section 4 – Force Mains
| Detail Name | Issue Date |
| S-4.01 - Sewer Force Main Air Release Valve |
05/31/2022 |
| S-4.02 - Air Release Valve Assembly |
12/30/2021 |
| S-4.03 - Concrete Buttress Configurations |
12/30/2021 |
| S-4.04 - Concrete Buttress Dimensions |
12/30/2021 |
| S-4.05 - Sewer Force Main Plug Valve |
12/30/2021 |
| S-4.06 - Sewer Force Main Isolation Valve |
12/30/2021 |
| S-4.07 - Sewer Force Main Toning Wire Box |
12/30/2021 |
| S-4.08 - Transition from HDPE to Non-HDPE Pipe |
12/30/2021 |
Section 5 – Low Pressure Sewer
| Detail Name | Issue Date |
| S-5.01 - Standard Grinder Pump Assembly |
01/18/2023 |
| S-5.02 - Standard Grinder Pump Assembly (Floodplain Areas) |
01/18/2023 |
| S-5.03 - Lateral Assembly Isolation Valve |
01/18/2023 |
| S-5.04 - LPS Discharge Connection |
09/09/2022 |
| S-5.05 - Terminal Flushing Connection |
09/09/2022 |
| S-5.06 - In-Line Flushing Connection |
09/09/2022 |
| S-5.07 - Control Panel Post Mounting |
01/18/2023 |
Electrical Standard Details
Electrical Standard Details – Full Set (0.9 MB PDF)
| Detail Name | Issue Date |
| E-1 - Antenna Pole |
12/30/2021 |
| E-2 - Site Light |
12/30/2021 |
| E-3 - Typical Grounding Plan |
12/30/2021 |
| E-4 - Ground Rod Types |
12/30/2021 |
| E-5 - Underground Conduit Installation |
12/30/2021 |
| E-6 - Electrical Terminators and Conduits and Bases |
12/30/2021 |
| E-7 - Tier 1 Pump Station Typical Electrical Cabinet Control Side |
12/30/2021 |
| E-8 - Tier 1 Pump Station Typical Electrical Cabinet Power Side |
12/30/2021 |
| E-9 - Tier 2 Pump Station Typical Electrical Cabinet Control Side |
12/30/2021 |
| E-10 - Tier 2 Pump Station Typical Electrical Cabinet Power Side |
12/30/2021 |
Pump Station Standard Details (Future)
Instrumentation Standard Details (Future)
Miscellaneous Standard Details
Miscellaneous Standard Details – Full Set (0.2 MB PDF)
For requirements related to the design and construction of private streets and related amenities, refer to Chapter 99 / Article III of Sussex County Code and/or the appropriate Federal and State requirements.
| Detail Name | Issue Date |
| M-1 - Concrete Sidewalk |
06/30/2022 |
| M-2 - Drainage Inlet Top Unit Type D-Modified |
06/30/2022 |